Installation Video Supplied Below

Estimated time: 5-10 Minutes Per Wheel

Tools: Standard hand tools

1. Place the stretcher on a flat and stable surface.

Prevent the stretcher from moving by chocking the wheels on one end.

2. Prop up one side of the stretcher so two wheels

are slightly off the ground and supported.

3. Release the brake on the wheel you’d like to replace,

so the wheel can spin freely.If the wheel has a cover, remove it by hand.

4. Remove the bolt and nut through the center of the wheel.

Set aside the hardware as you remove, you will need reuse that hardware.

5. Remove the old wheel and install the new wheel in its place.

Secure it with the original hardware.

6. If a cover was removed, reinstall it by hooking the large clip

onto the caster first, then pressing the opposite side until it snaps into place.

7. Repeat as needed. Spin the wheels and test brake and steer

functions before returning the stretcher to service.

Our Guarantee

If this wheel doesn’t ressolve your issue, we’ll take it back for a full refund.

Wholesale & Reseller Inquiries

Are you a repair company or reseller? Click the button below to send an inquiry for wholesale.

FAQ

• Is this wheel OEM?
  → This is an aftermarket replacement compatible with Stryker stretchers.
• Do you offer bulk pricing for wheels?
  → Yes, automatic discounts apply on 4+ wheels.
• How fast do orders ship?
  → Orders ship within 2 business days.

Installation Video Supplied Above